PDA

View Full Version : New slice racks


rfgonzo
06-15-2020, 11:34 PM
I gave it a try and built some slice cake racks a few weeks ago. Each rack will hold a min of one and a max of ten slice cakes.
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=5024&stc=1
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=5025&stc=1
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=5026&stc=1
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=5027&stc=1
Rick_In_Tampa
06-16-2020, 01:35 AM
Very nice!
MidwestPyrotechnics
06-16-2020, 08:14 AM
I like that! If I get some time in the next week or two I may have to try and build a few of these.
PyroJoeNEPA
06-16-2020, 12:38 PM
Nice Job! Are you using a carriage bolt thru the bottom and tightened with the knob on top?
rfgonzo
06-16-2020, 04:11 PM
Nice Job! Are you using a carriage bolt thru the bottom and tightened with the knob on top?

I did some with carriage bolt and some with cap screws. Both work fine, You just have to hold the cap screw on the bottom when tightening.
pyroboom
06-17-2020, 01:05 AM
Those looks like the same design from pyroboom.com. 5029
Delloman
06-17-2020, 03:45 AM
@pyroboom wish you had some in stock
pyroboom
06-17-2020, 10:10 AM
We will soon, but they won't be delivered until after 7/4.
joewad
06-17-2020, 10:21 AM
We will soon, but they won't be delivered until after 7/4.

I know what Santa's gonna bring me for xmas.
Scotty Rockets
06-17-2020, 11:31 PM
Nice job! Some like to add alum foil between the cakes in those racks to help with fire protection
rfgonzo
06-17-2020, 11:56 PM
Nice job! Some like to add alum foil between the cakes in those racks to help with fire protection

That's the plan. This was just a example. Nothing is prewired yet. I usually will wrap foil over a slice of cardboard that fits between each cake.