Breakout Boards for the Cobra and other fireworks firing systems

[displayfireworks1]

Sent to me for review. Will look at sometime in January.
.
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=4654&stc=1
.
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=4655&stc=1
.
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=4656&stc=1
.
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=4657&stc=1
.
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=4658&stc=1
.
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=4659&stc=1

[displayfireworks1]

.
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=4660&stc=1
.
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=4661&stc=1
.
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=4662&stc=1
.
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=4663&stc=1
.
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=4664&stc=1
.
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=4665&stc=1

[displayfireworks1]

.
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=4666&stc=1
.
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=4667&stc=1
.
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=4668&stc=1
.
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=4669&stc=1
.
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=4670&stc=1
.
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=4671&stc=1

[displayfireworks1]

.
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=4672&stc=1
.
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=4673&stc=1
.
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=4674&stc=1
.
end of pics

[mb_pyro]

Still waking up but are those binding post with banana jacks? Would be curious how much a board like that would cost with pyroclips instead.

[Rick_In_Tampa]

.
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=4672&stc=1
.
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=4673&stc=1
.
http://www.pyrotalk.com/bulletin/attachment.php?attachmentid=4674&stc=1
.
end of pics

Just got done installing 18 of these in 6 of my mods. Looking forward to giving them a test run during the Christmas break.

[357pyro]

The breakout boards that convert the DB 25 to 3 RJ45 could really work out great for the guys using the 36Ms

[Birdman]

The breakout boards that convert the DB 25 to 3 RJ45 could really work out great for the guys using the 36Ms

That's the board that caught my eye.

[displayfireworks1]

Here is a video I made on the breakout boards. I did this without doing any research to see what I could do with some of them.
.

https://www.youtube.com/watch?v=HAAJgw9rNV8

[Birdman]

The boards tested in the video appear to be the same as the 6S slats sold by Cobra? The boards that breaks out a DB25 connection to 3 RJ45 connections is the most interesting to me.

[displayfireworks1]

What would you do with the DB25 to RJ45 board? Do you already have Cobra cable set up to accommodate that? Then use that breakout board to run CAT 5 to other breakouts?

[Birdman]

What would you do with the DB25 to RJ45 board? Do you already have Cobra cable set up to accommodate that? Then use that breakout board to run CAT 5 to other breakouts?

I was thinking it would offer some flexibility. Take an 18M module, rather than running a single DB25 cable to an 18S slat you have the option of running a shorter DB25 cable to that breakout board then have 3 different runs of RJ45 to three 6S slats. Basically you can have an 18M mod with a DB25 and use it with a single 18S slat but you can also use it the same as an 18M equipped with 3 RJ45 and 3 6S slats.

[Birdman]

Looking at it again. It appears one of the DB25 to RJ45 boards would fit right into a DB25 connector on a mod so you might not even need a cable. If so you could run RJ45 right from the mod with this board plugged into the DB25 connector.

[displayfireworks1]

In this video I experiment with the breakout boards on a different firing system. I'm mixing 6 shot boards with a 12 shot board from another manufacture.
.

https://www.youtube.com/watch?v=ds1LJc-pMKQ

[Delloman]

Dose the hobby shop have a website? Interested in there products

[displayfireworks1]

Search it out or check with Cobra , they also sell breakout boards.

[Delloman]

Found them on ebay ordered a pile price can't be better